• Admin
  • Receive an Update

    You are Here in » » [Tutorial] How to make an MTK Droid tools backup of an MTK Android phone





    [Tutorial] How to make an MTK Droid tools backup of an MTK Android phone




    Note: This procedure is the same for all

    MTK based Android phones (e.g Tecno,
    Gionee, Infinix, TLC, Opsson, Innjoo,
    Lead1 etc )

    # See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8

    Tools needed

    * A working MTK phone
    * Download PdaNet
    * Download MTK Droid tools
    * PC
    * USB Cord

    Procedure

    * Enable USB debugging on the good MTK phone
    (Settings > Developer > Tick USB Debugging) then
    connect it to PC. If you don't find Developer under
    Settings then go to Settings > About > Keep taping
    Build Number

    * Install PdaNet on the PC with the USB
    debugging enabled working MTK phone still connected
    (Select Other from the list of devices during
    installation)

    * At the end of PdaNet installation, you should get a
    "drivers successfully installed" message
    * Exit PdaNet in system tray (bottom right corner of
    PC)

    * Launch MTK droid tools as Administrator (right-
    click > run as Administrator) still with the working
    MTK phone connected to PC
    * MTK droid tools should detect and display the
    phones details by the left along with a yellow box at the
    bottom

    * Click ROOT at the bottom of MTK and select
    Yes/OK if prompted on PC and Grant if prompted on


  • phone

    * A progress bar should load at the bottom shortly
    after which the yellow box should become green

    * Click on the root,backup,recovery tab at the top

    * Click Backup (MTK should keep writing some things
    by the right hand side during backup) and wait till
    backup is complete

    * If you get a prompt to pack backup, select No.

    * Once backup is complete, don't close MTK droid
    tools

    * Go to the MTK droid tools folder > Backups >
    Folder named after the phone's model e.g
    Tecno_m3_backup.... and take note of this folder as the
    'Backup folder' because we'll be referring to it soon

    * Go back to MTK droid tools and click 'To prepare
    blocks for Flash Tool'

    * A window will open, in this window, navigate to
    the Backup folder (mentioned above) and select the md5
    file

    * MTK will start copying some items (check the right
    hand side) so wait till copying is complete

    * If you get an error like "Preparation of files for
    FlashTool is impossible, file isn't found" then remove all
    scatter files in the backup folder except one and rename
    this last one to MT65??_Android_scatter ( where
    "??" represents the number for your phone model e.g
    MT6572_Android_scatter)

    * Once copying is complete, open the Backup folder
    and you should see a folder named "!Files to flash"

    * The !files to flash folder is a selection of files needed
    to use Sp Flash tool, keep it well

    * Both the !files to flash folder and the x_backup folder
    (which contains the !files to flash folder) are your
    phone's MTK backup...

    More Articles


    Make use of Smilleys Codes

    Quick Help!

    Having issues? Need quick fix? simply email me or call me

    Learn more

    Write For Us

    Submit a guest post and see it get published real quick

    Learn more

    Advertise Here

    Place relevant banners, links, and sponsored posts at affordable rate.

    Learn more

    Get notified on FB